超滤-纳滤组合工艺对东太湖原水的处理效果

随着工业化进程的不断加快,东太湖水质日趋恶化,给常规处理增加了很大的处理难度。针对水源污染问题和给水深度处理的需要,开展了超滤-纳滤双膜组合工艺处理东太湖原水的中试研究,考察双膜工艺对出水水质的提升效果。结果表明,超滤-纳滤双膜工艺对水质常规指标具有较好的去除效果,CODMn和TOC的去除率分别为91.7%和90%;对荧光类物质的去除主要表现在对芳香族蛋白质、类富里酸物质、溶解性微生物代谢产物的去除;此外,双膜组合工艺对小分子二甲基异莰醇(2-MIB)和土臭素(GSM)的去除率分别为70%和77%,表明该工艺对水中主要致嗅物质具有良好的去除能力。     

液晶显示器用有机高分子材料的老化与评价方法研究

通过对液晶显示器用有机高分子材料的老化机理分析,研究了胶带和胶黏剂分别在材料贮存期间和使用期间的主要应力及其薄弱环节。提出了在有机高分子材料不同的使用阶段相应的老化试验方案和失效评价指标,并给出了相应的试验验证过程,为液晶显示器用有机高分子材料的寿命评估提供了支持。     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

滨海基岩矿床安全开采合理隔离层厚度的确定

针对滨海基岩矿床安全开采合理隔离层厚度留设问题，基于材料力学、结构力学等共七种理论计算方法综合确定隔离层厚度，利用点柱式上向水平分层充填法建立三维数值计算模型，通过结合FLAC3D数值模拟软件，分析理论计算结果的合理性，研究不同中段开采充填情况下第四系底部的稳定性特征，最终得出安全开采所需的隔离层厚度必须在12m以上，合理的开采上限必须在-57m以上。通过分析数值计算模型第四系底部的沉降变形，发现第四系底部最大沉降集中于中间采场 ，最大沉降量为13.73mm。研究成果为滨海基岩矿床安全开采，提高资源回采率提供了有益指导。     

WSe2/rGO hybrid structure: A stable and efficient catalyst for hydrogen evolution reaction

The number of exposed active sites in a catalyst plays a key role in determining its catalytic performance. However, the aggregation effect in nanostructured catalysts causes much less reactive sites exposed. In this paper, we report a novel structure of WSe₂/rGO with highly exposed WSe₂ active edge sites by uniformly imbedding the rGO between each WSe₂ nanosheets. With the introduction of rGO, the electron transport property of the WSe₂/rGO hybrid structure has also been enhanced. The structure and composition of the samples were investigated by the X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. Our electrochemical characterizations confirm that the WSe₂/rGO hybrid structure exhibits enhanced electrochemical catalytic performance with a Tafel slop of 85 mV/dec for HER, much smaller than that of the pure WSe₂.     

提高河南某低品位金矿金回收率试验研究

河南某低品位金矿具有嵌布粒度不均匀、粒级分布宽和脉石夹杂严重等特点，金矿物的回收困难。为提高金的回收率，在工艺矿物学的研究基础上进行了一系列的选矿试验研究工作。结果表明：①原矿主 要有用矿物为自然金，原矿金品位为1.39 g/t；银品位为3.35 g/t，可以作为伴生金属综合利用。次要金属矿物主要为黄铁矿，另含有少量的黄铜矿、磁铁矿、辉铋矿和方铅矿等，脉石矿物主要为石英、斜长石、绿 泥石、云母、白云石、方解石，其次含少部分角闪石。②金颗粒主要是以包裹金（占58.83%）形式存在，其次是裂隙金（占23.53%），粒间金占比较小（占17.65%），其中石英包裹金占19.11%。③在最佳的试验条件 下，采用重—浮联合工艺，经3次尼尔森重选、1次摇床精选，重选尾矿经“1粗2精2扫”浮选，最终可以获得重砂含金986.60 g/t、金回收率为50.42%及浮选精矿含金35.75 g/t、金回收率为41.57%。全流程金的总回 收率达到了91.99%，较好地完成了该矿区金矿物的回收。     

计及风险规避的电力零售商平衡市场交易模型

由于新能源出力以及终端负荷需求的不确定性,电力零售商在日前市场的竞标电量与实时市场的购买电量之间存在不平衡而产生惩罚成本风险。引入用户侧可控负荷作为平衡资源参与市场交易,提出了一种风险规避程度指标,以此来度量交易前后电量偏差程度,以信息熵度量残差序列离散程度计算风险规避程度指标。以电力零售商运行收益、用户需求响应满意度以及风险规避程度最大为目标建立多目标风险规避模型,采用自适应权重粒子群算法进行模型求解。通过算例表明,所提出的模型从电网-电力零售商-用户多个角度去考虑电力零售商参与平衡市场交易策略,能够有效提高电力零售商的运行效益以及用户满意度,同时可以提高电力市场管理的可靠性与安全性。     

Fabrication and Characterization of Highly Oriented Composite Nanofibers with Excellent Mechanical Strength and Thermal Stability

Here, highly‐oriented poly(m‐phenylene isophthalamide)/polyacrylonitrile multi‐walled carbon nanotube (PMIA/PAN‐MWCNT) composite nanofiber membranes with excellent mechanical strength and thermal stability are successfully produced using electrospinning. It is demonstrated that the cooperation of multi‐walled carbon nanotubes (MWCNT) and high‐speed rotating collection is beneficial to the acquisition of highly oriented fibers and effectively improves the mechanical strength of the membrane along the orientation direction. Specifically, the tensile stress of poly(m‐phenylene isophthalamide)/polyacrylonitrile (PMIA/PAN) membrane is enhanced significantly from 10.6 to 20.7 MPa, benefiting from the highly oriented alignment of the fibers as well as the reinforcing effect of MWCNTs on the fibers. Furthermore, the stressing process of single fiber and fiber aggregates is carefully simulated, and the influence of MWCNTs on the mechanical properties of PMIA/PAN‐MWCNT membranes is analyzed comprehensively, providing a meaningful auxiliary means for the study of mechanical properties. In addition, the composite nanofiber membrane has the advantages of both PMIA and PAN, possessing high temperature resistance, flame‐retardancy, and chemical stability, for an ideal high‐temperature material. In short, the as‐prepared PMIA/PAN‐MWCNT composite membrane with excellent comprehensive property emerges a promising application in many fields, especially in high‐tech.